Flooring Solutions

Flooring Solutions

Special mortars for floorlevelling, decoration and protection

Request a sample
Request a sample


1 x
Flooring Solutions

I accept the conditions of the Privacy Policy

Paviland Desmoldeante Líquido
This product is a liquid demoulding agent for use on flooring and printed facings to avoid the concrete or mortar becoming stuck to the moulds.

Paviland ARQ Primer
Synthetic resin that is in use as promoter of adherence and primer fillers on supports of mineral, like cement or ceramic nature. Primer for the systems Paviland Arq.

Paviland Primer RBonding primer for Self-levelling Cement Systems by Grupo Puma, for interior and exterior use. Its high penetration performance on the substrate helps it to act as a substrate sealant and bonding primer.

Paviland Industrial EF
Powdered product which, when applied on fresh concrete forms a large, uniform surface layer with very high resistance to abrasion, especially designed for high performance industrial flooring.

Paviland Industrial
Powder product which is applied over fresh concrete to form an abrasion resistant monolithic wearing course, for use on industrial flooring.

Paviland Fibra
Specially formulated product to diminish the cracking tendency in mortars or concrete due to retraction.

Paviland ARQ Finish
PAVILAND ARQ FINISH is a coloured polymeric decorative finish for high quality interior and exterior applications with a maximum thickness of 1.5 mm. Finishing coat in the Paviland Arq systems.

Paviland ARQ Base
PAVILAND ARQ BASE is a high quality polymeric mortar for preparing and smoothing surfaces before installing microcement decorative smooth finishes. The maximum thickness for application is 4mm. Base coat from the Paviland Arq Base systems from Grupo Puma.

Paviland Impreso R
Powder product which is applied over fresh concrete to form an abrasion resistant monolithic coat, with short-term high mechanical strengths. The finishing, printing or texturing allows traditional flooring to be substituted (cobblestones, natural stone, slate, etc).

Paviland Plus
Mortar for high abrasion resistance stamped pavements in 5 to 20 mm thickness. Fine texture and stamping. Suitable to replace ordinary pavements (slabs, bricks, stones, slate and any continuous flooring with industrial or acidic finish). Can be used as a hydratation layer (fresh over fresh).

Paviland Desmoldeante
Product in powder form highly recommended to be used on stamped concrete. Avoids adhesion of moulds to concrete improving their release from the stamped concrete.

Paviland Impreso
Powder product that forms a monolithic surface highly resistant to abrasion. Stable texture and assorted patterns which can replace traditional floorings (paving stones, natural stones, slate, etc.) when applied on fresh concrete.

Niveland 30R
High performance self-levelling mortar, for preparing interior floors that once they have hardened, are suitable for receiving all types of floor finishes: ceramic tiles, parquet, carpets, etc. Pumpable. Thickness from 2 mm to 15 mm, or 15 mm to 30 mm with the addition of aggregate.

Paviland Industrial 15R Autonivelante
Self-levelling, normal setting flooring mortar, pumpable, for levelling and smoothing interior industrial flooring. This product has high mechanical and substrate bonding strength once hardened. Thicknesses from 5 to 15 mm. For interiors: suitable as a finishing coat or base coat to be covered with fine coverings that provide the floor with greater chemical or physical protection, or for a more aesthetic finish.

Paviland Industrial 25 Autonivelante
Self-levelling, normal setting, pumpable flooring compound, for levelling and smoothing industrial flooring.  Product with high mechanical and bonding strength to substrate once hardened. Thicknesses from 5 to 25 mm. For interiors: suitable as a finishing coat or base coat to be covered with fine coverings to that provide the flooring with greater chemical or physical protection or for a more aesthetic finish. For exteriors: only to be used as a base coat, must always be covered.

Paviland Solera Self-Levelling
Self-levelling flooring compound, normal setting, for levelling thick floors

Paviland Traffic 15 Self-Levelling Mortar
Self-levelling covering, normal setting, which once hardened, creates a highly flat surface with high mechanical strength and excellent bonding performance to the substrate. Suitable for thicknesses from 5 to 15 mm.

Paviland Self-Levelling Screed R
Self-levelling Mortar of great fluency, fast dry and once it gets hard, it create a slab of great flatness and mechanical resistance. Suitable for the accomplishment of self-levelling interiors from 10 to 50 mm in adhered screeds from 50 to 100 mm in floating screeds. Once hardened it must be covered by discontinuous pavements (ceramics, etc) or constant (paintings epoxy, etc).

Niveland 10R CT C25 F6
Self-levelling mortar fast and high performance, for indoor floors preparation. Once hardened, it is suitable for all kind of light floorings (tiles, parquet, fitted carpet, etc.).

Niveland 5 CT C20 F6
Self-levelling mortar for indoor floors preparation. Once hardened, it is suitable for all kind of light floorings (tiles, parquet, fitted carpet, etc.).

Paviland Traffic 15 R Autonivelante
Self-levelling coating, fast drying, which hardened once creates a coating of high flatness, high mechanical strength and excellent adhesion on the support application. Suitable for thicknesses between 5 and 15 mm.

Niveland 3 CT C20 F6
Self-levelling mortar for indoor floors preparation. Once hardened, it is suitable for all kind of light floorings (tiles, parquet, fitted carpet, etc.).

Paviland Recrecido Autonivelante
Self-levelling mortar of normal setting for the preparation of interior floorings. Once hardened it must be covered with a discontinuous coating as parquet, carpet, ceramic floor tiles, vinyl flooring etc., as well as synthetic continuous flooring (epoxy, polyurethane, etc.).

Paviland Resina A10
Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore. Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance. Due to its small particle size, it has good anchorage to the paving and increases its cohesion. Recommended as curing liquid with an aqueous base, best for printed paving.

Paviland Resina A6
Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore. Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance. Due to its small particle size, it has good anchorage to the paving and increases its cohesion. Recommended as curing liquid with an aqueous base, best for printed paving.

Paviland Resina A4
Product based on the dispersal of styrene acrylic resin with low water absorption.  Is has good resistance to alkalis and yellowing, as well as great flexibility and durability in the exterior. Recommended as curing liquid with an aqueous base, best for printed paving.

Paviland Resina AC2
Pure acrylic resin dispersion with low water absorption. Suitable for curing concrete on courts, industrial flooring, and continuous flooring in general. It controls water evaporation, regulating the drying time and contributing to a slow curing process which increases the final mechanical strength, achieving more durable surfaces and the maximum development of their hardness.

Paviland Resina AP30
Acrylic resin-based covering water based-solution, together with aqueous polyurethane dispersions based on aliphatic polyesters for the finishing of concrete flooring and hot mix asphalt in sports installations.

Paviland Resina D24
Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Paviland Resina D20
Liquid product best for paving protection, formulated on the basis of acrylic resins with excellent hardness and ultraviolet ray resistance, dissolved in aromatic solvents. Hardens through solvent evaporation and is especially advisable for concrete varnish, cut stone, etc, both in the interior and in the exterior, leaving a protective and decorative film with excellent properties.

Paviland Resina D10
Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Paviland Resina DC2
Liquid product best for the concrete curing process in order to promote its maximum performance. Controls hydration water evaporation regulating dry out time and favours slow curing to achieve an increase of final mechanical resistance, achieving more tenacious surfaces and the maximum development of its hardness. Acts on the surface forming a plastic closing capable of eliminating systematically the formation of cracks and of controlling superficial retraction.

Paviland ARQ Varnish
Finished treatment for pavements of resin, cement or micro-cement which provides a surface, with bactericidal efficiency, of great impermeability, easy cleanliness, high resistance to the graze and the abrasion. It highlights and embellishes the pavement. Completion varnish for the systems Paviland Arq.

Paviland ARQ Resin
Acrylic priming monocomponent, based on resins in watery dispersion indicated for the preparation of the microcement surface before the application of the Paviland Arq Varnish. Fund of preparation of the completion varnish for the systems Paviland Arq.

Paviland Drenante
Dry-mix concrete, intended for highly permeable flooring systems; constitutes an alternative to traditional flooring aesthetics. It reduces and/or prevents the surface flow of rain water or any other type of water by allowing permeation. It complies with Royal Decree 505/2007, of 20 April, which approved the basic conditions of accessibility and non-discrimination of people with disabilities for accessing and using developed public spaces and buildings. Paviland Drainage is free of resins so it does not emit volatile organic compounds that are harmful for the person applying the product and the environment.

Paviland HS25
Dry-mix concrete.

Ambient Images